A cabinet refresh can hinge on hardware that appears small but changes the entire room. For shaker cabinets, the pull’s finish, projection, and hole spacing need to work with the door profile, especially in a busy kitchen where hands and utensils reach for the same drawers every day.
The eight options below come from the same hardware-focused range, with matte black, black nickel, and mixed-metal finishes rather than a uniform brushed nickel treatment. I focus on the measurements that determine fit, including center-to-center spacing, overall length, and how far each handle extends from the cabinet.
The Essentials At A Glance
Alzassbg AL3071MB Pull
Alzassbg AL3015AS Pull
Alzassbg AL3902MBSN Pull
Alzassbg AL3061MB Black Pull
Alzassbg AL3028MB Pull
Alzassbg AL3097CPMB Black Pull
Alzassbg AL3085MB Pull
Alzassbg AL3043MB Black Pull
More On The Choices That Made The List
The AL3071MB combines a familiar matte black finish with a 5-inch hole center, making it the most conventional starting point for shaker doors with standard drilling layouts. Its 5.8-inch overall length leaves a modest amount of surface around the mounting holes, while the 1-inch projection provides enough clearance for a comfortable grip without projecting dramatically.
For a kitchen renovation covering several cabinets, the practical appeal is consistency rather than visual novelty. The set contains ten pulls, which is convenient for a coordinated run of doors and drawers. I would favor this model for understated black hardware, though it does not reproduce the lighter brushed nickel finish suggested by the intended style.
Useful Highlights
- The 5-inch hole center fits many common cabinet layouts.
- A 1-inch projection creates useful clearance without looking oversized.
- Ten matching pulls support consistent multi-door installations.
- Matte black complements white, wood, and dark cabinet finishes.
- Two mounting screw sets accompany the hardware.
Points To Keep In Mind
- The finish is matte black rather than brushed nickel, so color matching matters.
Quick Facts
Made For
This model suits homeowners refreshing standard five-inch shaker doors with matte black hardware.
Where Another Pick Shines
The Alzassbg AL3015AS Pull is the better fit for cabinetry seeking a darker nickel appearance with greater projection.
Black nickel gives the AL3015AS a darker, more reflective direction than the matte option leading the list. Its 1.3-inch projection is the deepest among the five-inch pulls here, which may feel more substantial in the hand and create clear separation from the cabinet face.
I like this choice for darker cabinetry, charcoal walls, or a room where black hardware needs a hint of metallic depth. Compared with the AL3071MB, it keeps the same 5-inch mounting span but trades the AL3071MB’s shorter 5.8-inch body for a longer 7.4-inch profile, so door-edge clearance deserves attention.
The Case For It
- Black nickel adds metallic character to an otherwise dark palette.
- The deep projection gives fingers generous room behind the pull.
- A five-inch center suits standard wide-door drilling patterns.
Trade Offs
- Its 7.4-inch length needs more horizontal space than the AL3071MB.
- Black nickel is not interchangeable with a brushed nickel finish.
Right Fit For
This pull suits homeowners decorating dark shaker cabinets with reflective, statement-oriented hardware.
A Better Fit Elsewhere
The Alzassbg AL3061MB Black Pull suits larger black hardware projects that need a shorter overall profile.
The two-tone AL3902MBSN is the first option here with an explicit nickel element paired with matte black. That combination works well for cabinetry that needs a little contrast without moving fully into bright chrome territory.
Its 3.75-inch center and 4.4-inch overall length make it more compact than the five-inch models. The smaller footprint may suit drawers and narrow doors, although the six-piece count covers fewer doors than the ten-pull sets. Compared with the AL3015AS, it brings mixed colors and a shorter mounting span rather than deeper projection.
Features That Help
- The black and nickel pairing creates a coordinated two-tone accent.
- A 3.75-inch center fits intermediate-width cabinet doors.
- Its 4.4-inch body preserves visual space on compact fronts.
- The 0.9-inch projection offers practical finger clearance.
Less Ideal Details
- Only six pulls are included for a smaller coordinated set.
- The mixed finish may not align with a strictly single-color plan.
- Five-inch drilled doors require different mounting centers.
Feature Snapshot
Who Will Love This
This set appeals to decorators using black and nickel accents across compact cabinets and drawers.
Consider Something Else When
The Alzassbg AL3097CPMB Black Pull suits larger installations that need ten pulls and a stronger mixed-metal look.
The AL3061MB keeps the classic matte black appearance while offering a 5.6-inch body, slightly shorter than the AL3071MB. That difference is subtle, but it can matter on a narrow shaker door where a few extra millimeters affect the visual balance.
Its 1.1-inch projection gives the pull a little more presence under the fingertips without reaching the depth of the AL3015AS. I would choose this for a broad cabinet refresh where black hardware should recede into the design, especially across doors and drawers that use the same five-inch mounting pattern.
Advantages To Know
- The shorter 5.6-inch body fits comfortably on many cabinet fronts.
- A 1.1-inch projection balances visibility and hand clearance.
- Ten pulls support a coordinated whole-room installation.
Practical Considerations
- Existing holes must match either the offered three-and-three-quarter-inch or five-inch centers.
- The finish remains matte black rather than brushed nickel.
Built With In Mind
This model serves straightforward black-hardware projects with a five-inch mounting pattern.
Another Choice May Suit
The Alzassbg AL3028MB Pull is the better fit for drawers drilled three inches apart.
Three-inch spacing gives the AL3028MB a useful place in the range for smaller drawers and compact doors. The full handle still measures 5.1 inches, so it looks more substantial than its mounting span alone might suggest.
For a busy kitchen, the one-inch projection creates a practical grip without adding a bulky silhouette. It also provides a clear alternative to the five-inch models: homeowners with three-inch holes need not force a wider handle onto a narrow drawer front. The ten-pull quantity suits a coordinated run of smaller cabinets.
Everyday Perks
- The three-inch center fits common compact drawer layouts.
- A one-inch projection supports a natural finger grip.
- Ten pieces cover a useful number of drawers or doors.
- The matte finish remains restrained in a working kitchen.
Small Caveats
- The three-inch center will not align with five-inch cabinet holes.
Quick Technical Notes
The Right Fit
This pull fits homeowners replacing hardware on smaller drawers with three-inch mounting holes.
Skip It When
The Alzassbg AL3043MB Black Pull suits cabinetry using the less common three-and-quarter-inch center.
The AL3097CPMB stands apart with a black-and-silver treatment and a 1.34-inch projection, the deepest figure among the listed models. That reach can make a small pull easier to grasp in a kitchen where several cabinet fronts sit close together.
Its three-inch center also makes it more compact than the five-inch options, although the 5.11-inch overall length and 0.75-inch width preserve a substantial appearance. Compared with the AL3902MBSN, it expands the set from six pulls to ten and shifts the secondary metal from nickel to silver.
Why It Works Well
- The 1.34-inch projection gives fingers generous operating space.
- Black and silver create clear contrast on cabinetry.
- Ten pulls cover a broad group of doors and drawers.
- The three-inch center works with compact mounting layouts.
- A 5.11-inch body adds visual weight to a smaller pull.
Things To Consider
- The deeper projection uses more space behind the cabinet front.
- Silver creates a brighter accent than the subtler nickel option.
- Three-inch holes are required for the stated center spacing.
Core Details
Whose Shelf It Belongs On
This set suits transitional kitchens featuring black cabinetry and silver accents.
Reach For A Different Pick When
The Alzassbg AL3902MBSN Pull suits smaller projects seeking a smaller two-tone body and a nickel accent.
The AL3085MB is among the shorter options here, measuring 4.4 inches overall despite using three-inch hole spacing. That compact body suits narrow drawer fronts where the longer AL3028MB might dominate the available space.
Its 1.2-inch projection offers more hand clearance than the more compact-looking AL3902MBSN. The ten-pull set is the practical reason to favor it over the six-piece mixed-metal option for a larger renovation. For a narrow but heavily used cabinet run, that combination of short length and moderate reach looks sensible.
A Favorable Mix
- The 4.4-inch body fits comfortably on narrow cabinet fronts.
- A 1.2-inch projection creates useful hand clearance.
Factors To Consider
- The mounting center is limited to the offered three-inch or three-and-three-quarter-inch options.
- Matte black creates less visual contrast than a two-tone finish.
Best Suited To
This pull suits homeowners working with narrow drawers and compact cabinet spacing.
Look Elsewhere When
The Alzassbg AL3071MB Pull suits five-inch doors that need a more substantial body.
The AL3043MB covers a useful middle measurement with a 3.25-inch hole center. That spacing can suit custom cabinet layouts that fall between the more common three-inch and three-and-three-quarter-inch patterns, although existing doors still need to match it exactly.
At 3.75 inches overall, it has the shortest listed body, and its 0.39-inch width keeps the face narrow. The 1.18-inch projection still gives fingers room to move behind the pull. I see this as a thoughtful choice for measured custom work, especially where a long decorative handle would crowd the door.
What Makes Sense
- The 3.25-inch center fits a specific intermediate layout.
- A 3.75-inch body leaves a narrow footprint on the door.
- The 1.18-inch projection provides practical finger space.
Possible Compromises
- Three-and-a-quarter-inch holes are less interchangeable than three-inch centers.
- The matte finish does not match brushed nickel hardware.
- The five-inch center requires a different layout from the stated measurement.
Technical Highlights
Made For
This model suits custom cabinet projects measured with a three-and-one-quarter-inch hole center.
Not A Match When
The Alzassbg AL3028MB Pull suits standard narrow drawers drilled three inches apart.
What Matters Before Ordering Cabinet Pulls
Measure the hole center first
Hole center means the distance between the two screw holes, not the full length of the pull. Measure the existing holes from center to center before choosing a model. The five-inch options fit a common wider-door pattern, while three-inch and three-and-three-quarter-inch versions suit many drawers.
Compare projection with the surrounding space
Projection is the distance from the cabinet face to the back of the pull. Greater reach can improve finger clearance, but it may crowd an adjacent wall or appliance. The AL3071MB sits at one inch, while the AL3097CPMB reaches 1.34 inches.
Match the finish to the cabinet
Black nickel, matte black, and mixed silver finishes create distinct visual effects. Brushed nickel projects a softer metallic direction than the darker finishes represented here. For coordinated cabinetry, comparing hardware samples with the door color and nearby metal finishes prevents an unintended contrast.
Practical Details That Prevent Fit Problems
Mistakes Worth Dodging
The most common mistake is measuring the handle length instead of the distance between mounting holes. Another error is ignoring projection in a narrow run between a wall and cabinet. Checking both measurements keeps the decorative choice from becoming an installation problem.
What Separates Premium From Basic
A higher-tier pull may add a more distinctive finish, refined proportions, or a comfortable deep projection. Those features matter in a prominent kitchen, while matte black hardware on compact drawers can provide the needed visual update with a more restrained design.
Frequently Asked Questions
What is the best hole spacing for shaker cabinet pulls?
Five-inch spacing suits many wider cabinet doors, while three-inch spacing commonly fits drawers and smaller fronts. The existing drilling pattern should determine the choice.
How do I measure cabinet pull spacing?
Measure from the center of one screw hole to the center of the other. That center-to-center distance is the hole spacing that must match the replacement pull.
Which option is closest to a brushed nickel appearance?
The AL3015AS uses a black nickel finish, while the AL3902MBSN combines matte black with nickel. Neither has a brushed nickel finish, so color and sheen should guide the final choice.
Which pull works best for standard five-inch doors?
The AL3071MB and AL3061MB both offer a five-inch center and ten-pull sets. The AL3071MB has a slightly longer body, while the AL3061MB projects farther from the cabinet face.
Should projection matter on kitchen drawers?
Projection determines the clearance between the cabinet face and the back of the pull. Compact layouts benefit from a shorter reach, while frequently used drawers may feel easier to grip with more projection.
Final Verdict
The AL3071MB is the most straightforward choice for standard five-inch doors, while the AL3015AS adds darker metallic character and deeper reach. Compact cabinets favor the AL3028MB or AL3085MB, and mixed-metal styling points toward the AL3902MBSN or AL3097CPMB. Measuring the existing holes and checking projection before choosing keeps the finish decision on solid ground.